Maintenance Electrician

We are looking to hire an experienced Maintenance Electrician to look after the electrical system of our building. As a Maintenance Electrician, you will be required to conduct general maintenance inspections, perform routine electrical maintenance, respond to faults and wiring issues, and install major electrical appliances for the building.

Job Responsibilities:

  • Routinely inspecting electrical systems such as wiring, fixtures, and appliances.
  • Identifying faults or hazards.
  • Troubleshooting system failures.
  • Reviewing blueprints to understand wiring placement.
  • Testing of electrical systems with oscilloscopes, voltmeters, and ohmmeters.
  • Conducting maintenance repairs on old or faulty fixtures.
  • Responding to fault requests.
  • Providing suggestions for equipment replacement.
  • Writing electrical maintenance reports.
  • Installing new electrical appliances in the building.
  • Adhering to safety and performance standards.

Job requirements:

  • High school diploma or GED.
  • Electrician qualification certificate.
  • Proven work experience as a Maintenance Electrician.
  • Familiarity with industrial electrical systems and the National Electrical Code.
  • Good problem-solving skills.
  • Physically strong and able to stand for long periods.
  • Good communication skills.

Pay Rate: $34k-59k per year

Days/Hours (shift): Monday- Friday(8am-5pm)(3:30pm-11:30pm) 

*Hours are subject to change depending on workload, must be flexible.

Maintenance Mechanic

We are looking for a skilled Maintenance Mechanic to install, repair, and maintain machinery and equipment. The Maintenance Mechanic’s responsibilities include performing regular inspections of machinery and equipment, carrying out preventative maintenance, and fulfilling other duties such as building maintenance as assigned

Job Responsibilities:

  • Assembling, installing, and maintaining mechanical systems, machinery, and equipment.
  • Troubleshooting machinery and performing routine preventative maintenance.
  • Reading, interpreting, and following instructions and operation manuals.
  • Maintaining a schedule for inspecting, servicing, and testing machinery.
  • Cleaning, repairing and installing equipment and parts as needed.
  • Operating a variety of hand and power tools.
  • Maintaining a clean and organized work area.
  • Complying with health and safety regulations.
  • Performing general maintenance work on buildings as assigned.

Job requirements:

  • High school diploma/GED.
  • 2+ years of experience as a Maintenance Mechanic or in a similar role.
  • Trade or vocational school graduation preferred.
  • Knowledge and ability to operate hand and power tools.
  • Mechanical aptitude and ability.
  • Strong computer skills.
  • Physical dexterity.
  • Good troubleshooting skills.
  • Knowledge of health and safety regulations.

Pay Rate: $16-29 per hour

Days/Hours (shift): Monday- Friday(8am-5pm)(3:30pm-11:30pm) 

*Hours are subject to change depending on workload, must be flexible.

Electrical Assembler/Panel Wirer

We are seeking an Electrical Panel Wirer who is responsible for panel wiring and field routing of wire harness to motor, heater, sensors, etc. as well as proper grounding practices / device grounding practice

Job Responsibilities:

  • Operate machinery, equipment, and computer terminals
  • Test, Troubleshoot and correct panel
  • Make sure wires are tie wrapped and neatly inserted in enclosures.
  • Complete electrical panels on time
  • Machine wiring “a huge plus”
  • Visually inspect and reject parts outside of written specifications
  • Effectively wire a variety of products that range from standardized design and function to non-standard products
  • Operate within standard operating procedures (SOPs), position overview, wiring diagrams, schematics, blue prints, and work instructions
  • Use proper tools as needed to crimp wires and create harnesses
  • Complete daily production and quality logs and labor cards

Job requirements:

  • High school diploma or equivalent, with a preference for trade school training and/or 1+ years of related experience
  • Experience using Electrical Schematics
  • Proven electrical and mechanical aptitude
  •  Knowledge of Quality inspection principles
  • Use of hand tools, power tools, and electrical testing equipment
  • Self-starter and willing to accept new challenges

Pay Rate: $16-20 per hour

Days/Hours (shift): Monday- Friday(8am-5pm)(3:30pm-11:30pm) 

*Hours are subject to change depending on work load, must be flexible.

Mechanical Assembler

We are seeking a Mechanical Assembler who is responsible for completing mechanical builds or operations to print and sales order, throughout the manufacturing process.

Job Responsibilities:

  • Assemble machinery and components off custom blueprints
  • Operate hand and power tools to fabricate parts
  • Keep work station clean and organized Requirements: 
  • Ability to read blueprints
  • Ability to operate hand and power tools
  •  Use a variety of precision measuring devices to set up and adjust parts and verify conformance of work
  • Troubleshoot basic assembly problems.
  •  Perform general preventive maintenance work on tools and equipment.

Job requirements:

  • Requires high school diploma (or equivalent) plus three to five years’ related experience.
  • Must be familiar with portable power tool and machine tools such as drill press, band saw, cut-off saw and grinder.
  • Ability to read and understand documents such as blueprints, operating and maintenance instructions, and procedure manuals. Basic familiarity with G.D.&T. helpful but not required
  • Ability to write standard documentation & comfortable with documenting on a computer
  • Ability to communicate effectively (oral and written) with other employees of the organization in a quick and accurate manor.
  • Requires mathematical skills that require the ability to add, subtract, multiply and divide. Must perform metric conversions.
  • Ability to apply commonsense understanding to carry out instructions furnished in written, oral, or visual formats.
  • Basic knowledge of carpentry and \ or pneumatics is beneficial but not require

Pay Rate: $22k-40kper year

Days/Hours (shift): Monday- Friday(8am-5pm)(3:30pm-11:30pm) 

*Hours are subject to change depending on workload, must be flexible.

Flux-Core Welder

We are seeking Flux-core welders who will fabricate heavy duty equipment from start to finish. This is a full on fabricating position that will require welding mild steel.

Job Responsibilities:

  • FluxCore 0.52, 3/32, 1/16
  • Read Blueprints and understand welding symbols
  • Move material using a forklift and crane according to standard operating procedure, safety regulations and practices
  • Select and install proper welding wire and gas mixture
  • Operate a fuel gas hand torch for heat straightening purposes
  • Perform cleaning, assembly, and straightening operations as directed by Supervision
  • Set-up and fine tune welding machine for proper wire speed and machine voltage

Job requirements:

  • A minimum of two years experience as a Welder
  • The right candidate should pass a follicle test and Weld test
  • High school diploma or equivalent
  • Able to read and comprehend blue prints
  • Work at heights and in confined spaces
  • Able to read a tape measure, pressure gauge, level, and square

Pay Rate: $15-25 per hour

Days/Hours (shift): Monday- Friday(8am-5pm)(3:30pm-11:30pm) 

*Hours are subject to change depending on workload, must be flexible.

Tig Welder

We are seeking a TIG welder to assemble stainless steel products ensuring the highest possible quality at the lowest possible cost, while meeting customer specifications and delivery requirements and company performance standards, in accordance with the organization’s Code Of Conduct and Operating and Guiding Principles, and maintaining a positive work atmosphere by his/her behavior and communications to others.

Job Responsibilities:

  • Oversee the selection and procurement of materials and equipment required for TIG welding
  • Measure and align workpieces using straightedges, clamps, and calipers
  • Fill ducts with water/air and submerge in water to identify pipe leakage
  • Ensure compliance with established health/safety policies and regulations
  • Carry out grinding and thermal cutting operations to obtain various textures and sizes for metal parts
  • Oversee the set-up of TIG welding equipment
  • Operate power and hand tools such as arc welders, buffing machine, and scrapers
  • Maintain good working knowledge of the welding characteristics of metals such as stainless steel, aluminum, and titanium
  • Read and interpret welding blueprints, schematics, and codes
  • Carry out preventative maintenance and repair of piping systems and metal structures
  • Ensure welding operations meet set specifications and construction requirements
  • Perform TIG welding on materials such as fiberglass, iron, plastic, and copper
  • Conduct radiographic and bend tests to verify the quality of weld.

Job requirements:

  • High school diploma or similar.
  • A completed apprenticeship or vocational training.
  • A relevant certificate from a welding association may be required.
  • Excellent stamina, strength, and dexterity.
  • Ability to remain calm and focused under pressure.
  • Sound understanding of welding safety.
  • The ability to teach would be advantageous.
  • A willingness to learn and work overtime when required.

Pay Rate: $16-22 per hour

Days/Hours (shift): Monday- Friday(8am-5pm)(3:30pm-11:30pm) 

*Hours are subject to change depending on work load, must be flexible.

//www.staffpros.com/wp-content/uploads/2021/03/Site-Logo-REF.png

Milwaukee’s best Staffing Company.

2457 N Mayfair Rd, STE 200, Wauwatosa WI 53226

(414) 258-2272

info@staffpros.com

Job Alerts

Enter your email address here always to be updated. We promise not to spam!

en_USEnglish